©2020 RENDA·All rights reserved Site Map
- +86-13962273937 (Working Time)
- Dengying Village, Jinfeng Town, Zhangjiagang, Suzhou, Jiangsu, China (Mainland)
-
It is used for testing of high melting-point engineering plastic such as PE, PASU, fluoroplastic and nylon. As well as testing of low melting-point material such as PS, PP ABS resin, POM. It is commonly adapted by college institution, research center, quality inspection organizations, plastic manufacturer and petrol chemical industries.
It is used for testing of high melting-point engineering plastic such as PE, PASU, fluoroplastic and nylon. As well as testing of low melting-point material such as PS, PP ABS resin, POM. It is commonly adapted by college institution, research center, quality inspection organizations, plastic manufacturer and petrol chemical industries.
Product features
1.3 sections control temperature method, three platinum resistance sensors and three copper heating sleeves are used to control the temperature separately. High precision intelligent PID control, heat temperature speed can be adjusted.
2. temperature solution is 0.1 ºC, the temperature fluctuation is not over 0.5ºC within 24h, the placement sensor resolution is 0.001mm
3. over-temperature protective device
4. material can be cut manually and automatically, the cutting time(0~999)can be set arbitrarily and times(0~999)
5.when testing , can choose MFR/ MVR or both, it can also calculate the melt rate ratio. Both methods are tested when the piston rod moves to a certain position.
6. Can set 240 seconds (GB3682) material preheating seconds countdown. The weight is automatically loaded and automatically cut when loaded to the specified period. It can be set ASTM standard.
7.Built-in microprinter
8.High precision touch screen controller(7 inch)
9.Reserve the RS232 interface or USB interface to connect to the computer
| Standard NO. | Name |
| GB/T 3682-2000 | Thermoplastic melt mass flow rate and melt mass volume flow rate testing-MFR |
| ISO 1133-1:2011 | Plastics-Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics - Part 1:Standard method |
| ASTM D1238 | Standard test method for determining melt flow rates of thermoplastic plastics by extruded plastimeters |
Temperature range:0ºC-400ºC
Temperature fluctuation:±0.2ºC
Temperature uniformity:±1ºC
Temperature display resolution rate:0.1ºC
Time display resolution rate:0.1S
Cylinder diameter:Φ2.095±0.005mm
Outlet length:8.000±0.025mm
Barrel diameter:Φ9.550±0.025mm
Weight precision:±0.5%
Method of output:Micro automatic printout
Method of cutting:Automatic and hand cutting
Test load:8 grades
Power :AC220V±10% 50HZ
©2020 RENDA·All rights reserved Site Map
