©2020 RENDA·All rights reserved Site Map
- +86-13962273937 (Working Time)
- Dengying Village, Jinfeng Town, Zhangjiagang, Suzhou, Jiangsu, China (Mainland)
-
it's labeling machine suitable for different bottles and jars. speed adjustable from 6000 to maximum 36000 bottle per hour. can do one side or wrap around labels in hot glue
Function：
The device is a new type of device. Applicable to a variety of mineral water, yogurt, beverages, milk, and other PET, PP, PE round the entire circumference of the bottle is attached. Feeding a roll OPP, paper, paper-plastic composite film.
Equipment constitutes：
Host machine | |
1 | Panasonic ultra-small inertia servo motor and drive |
2 | Panasonic programmable logic controller (PLC) |
3 | Taiwan touch screen |
4 | Germany SICK-speed high-resolution color label sensor |
5 | High-speed high-resolution glue leak detection sensor stickers |
6 | Product testing photoelectric switch |
Mechanical parts | |
Transportation agencies | AC motor, inverter speed |
Conveyor: | Italian industrial nylon chain plate conveyor |
Divide bottle | Star wheel |
Into the bottle agencies | with the star wheel of the bottle body, star wheel positioning to ensure the accuracy and stability into the bottle |
Labeling agencies | a combination of vacuum arc guide drum driven bottle during rotation for labeling |
Label delivery mechanism | high-speed servo label film label transmission system (Panasonic servo motor drive) |
Glue supply system | hot melt glue supply system to ensure the accuracy and uniformity of glue |
Stainless steel: | GB 304 stainless steel |
Safety equipment part | |
Safety | When the device is running off the protective door, preventing damage to the operator |
Lack of label alarm | When the tag is not transferred to the vacuum drum, glue roller automatically bounce avoid the glue applied to the vacuum drum |
Inverted bottle Alarm | when the lack of inverted bottle, equipment audible alarm and shutdown protection |
Leakage paste alarm | When the drain stick, the device audible alarm and shutdown protection |
Coil detection | When coil close to running out, the device ahead of sound and light alarm to alert the operator to replace the roll |
Temperature detection | When hot melt temperature of less than equipment requirements, tire fails to start |
Vacuum test | when the vacuum pressure is less than equipment requirements, equipment audible alarm and shutdown to avoid defective products |
Labeling works:
l The quote quote mark in terms of labeling machine , is a new concept , which uses continuous operation off the label , adhesive and then post to the container , rather than pre- cut labels or accumulation.
l sent by conveyor belt over the container is small star wheel in accordance with the spacing separated by a big star wheel star wheel to the labeling guide plate , rotated by a vacuum vessel began to drum and complete labeling throughout stickers standard procedure , the container close to the vacuum drum and synchronous rotation with the vacuum drum , so the labeling is very good : smooth, tight .
l tag used in ultra-small Panasonic supply system inertia high speed servo motor control pins host computer system to send standard delivery standard, the use of sensors to find the tag label , the notification controller controls its advanced position and precisely cut , and then transferred to the vacuum drum .
l When a label on the vacuum drum sensor detected near the vacuum drum roll coating and hot melt coating to the label . In this section, only the pins both edges of the system into two parts adhesive, hot melt adhesive such a manner that the adhesive consumption to a minimum.
l When gummed label to label position, the label can accurately and effectively stick to the container. As the labeling process , the container is always in sync with the rotation state of the vacuum drum , thus , the label can be smoothly , tightly attached to the container. End of the tape in the size can form a good lap seal label , a labeling process is completed
RTB-300 wrapping labeling machine technical specifications
Voltage | 380V 50 Hz |
dimensions | 3200mm *1550mm*2140mm |
Conveyor line speed | 30m/min |
Speed adjustment | stepless frequency |
maximum standard speed | 90m/min |
Maximum Labeling speed | 300/min |
Accuracy of the paste | ± 0.5mm |
Labeling accuracy 0.5mm | ± 0.5mm |
Label width(height) | 15-150mm |
Labeling length | 125-325mm |
Bottle height | 70-360mm |
Bottle diameter | 30-90mm |
maximum diameter roll film | 500mm |
Paper core diameter | 3 inches ( can also be used 6 inches ) |
Unwinding stations: single-station | single-station |
Labeling colloid | hot melt glue only on the label |
Glue temperature | 120 ~ 160 ℃ |
Label Type | PP class film labels , paper-plastic labels, paper labels |
Compressed air | 8 (kg/cm2) |
Mold Labeling quantity | standard configuration for a set |
Weight | about 2500 Kg |
©2020 RENDA·All rights reserved Site Map
